Our Support ...

This page contains manuals and other documentation plus software (downloadable or guides to obtaining) for the Elektralite my250w.

DMX

Elektralite my250w DMX Channel Assignments

Note : The DMX assignmnets below can be downloaded as a PDF from the sidebar at right.

• Channel 1 - Color Wheel 1 :
  • 0-25 Open / white
  • 26-51 Color 1
  • 52-77 Color 2
  • 78-103 Color 3
  • 104-127 Color 4
  • 128-189 Forwards rainbow effect from fast to slow
  • 190-191 No rotation
  • 192-255 Backwards rainbow effect from slow to fast
• Channel 2 - Cyan color mixing wheel :
  • 0-255 0 = White. 255 = Full Cyan
• Channel 3 - Magenta color mixing wheel :
  • 0-255 0 = White. 255 = Full Magenta.
• Channel 4 – Yellow color mixing wheel :
  • 0-255 0 = White. 255 = Full Yellow.
• Channel 5 - PAN movement 8bit :
• Channel 6 - TILT movement 8bit :
• Channel 7 - Speed pan/tilt movement
  • 0-14 max speed (Recommend this is the default setting)
  • 15-225 max to min speed
  • 226-235 blackout when pan or tilt moves
  • 236-245 blackout when color changes
  • 246-255 no function
• Channel 8 - Effect wheel
  • 0-70 Full beam (This is the default setting)
  • 71-230 Beam shaping
  • 231-255 Frost filter dichrioc
• Channel 9 - Zoom
  • 0-255 0 = 28 degrees (maximum opening), 255 = 7 degrees (minimum opening)
• Channel 10 - Shutter and strobe :
  • 0-31 Shutter closed
  • 32-63 Dimmer control (shutter open. This is the recommended first position for the shutter if you intend to be using the dimmer channel 11).
  • 64-95 Strobe effect slow to fast
  • 96-127 No function (shutter open)
  • 128-159 Pulse effect in sequences
  • 160-191 No function (shutter open)
  • 192-223 Random strobe effect slow to fast
  • 224-255 No function (shutter open)
• Channel 11 – Dimmer intensity
  • 0-255 Intensity 0 to 100%
• Channel 12 – Lamp on/off, reset, internal programs
  • 0-19 Color change normal. Snapping from one color to the next. This is the preferred setting.
  • 20-39 Color change fine. Allows half colors (between colors) to be chosen.
  • 40-59 Lamp on. To strike the lamp (when the fixture has been “told” to get the lamp strike info from the controller) engage this channel at between 40-59 for about 7 seconds. The lamp will then strike. Once struck the value can be changed back to
    0 as a rest/parking position.
  • 60-79 Lamp switch off. Engage this range of values for 7 seconds and the lamp will turn off. You have been warned!!
  • 80-99 Motor reset. Engage this range of values for 7 seconds and the motors will reset in the fixture. The reset will complete in about 30 seconds. If you continue to leave this channel at between these values then the fixture will constantly reset. Not a pretty thing to do!
  • 100-119 Internal program 1
  • 120-139 Internal program 2
  • 140-159 Internal program 3
  • 160-179 Internal program 4
  • 180-199 Internal program 5
  • 200-219 Internal program 6
  • 220-239 Internal program 7
  • 240-255 Internal program 8
• Channel 13 – Pan fine 16bit
• Channel 14 – Tilt fine 16bit

Color Wheel

The my250w is provided with the following colors shown for convenience against Rosco and Lee swatch reference.

Note : The colors equivalents were subjectively assessed and some variation is bound to exist due to such variables as lamp life.

Color Wheel